| Customization: | Available |
|---|---|
| Certification: | ISO: 9001 |
| Condition: | New |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1253C-4402 24-36V 400A DC Motor controller For CURTIS electric vehicle
| Product nume |
DC Motor Controller |
Car Fitment | MIMA, HELI, HANGCHA, NOBLELIFT, EP, TCM, LIFTSTAR, XILIN, HYSTER, etc. |
| Voltage Options | 24-36V | Current | 400A |
| Model |
1253C-4402 |
Storage temperature | -40°C to +50°C |
| Color | Original Color | Type | DC |
| Size | L309 x W180 x H82 mm | Single gross weight | 4.2kg |
| MOQ | 1 PCS | Port | Ningbo/Shanghai |
Key Features:
- Curtis Model: 1253C-4402 (HELI Forklift Controller Model: DQKC-025 or EVC-019)
- Norminal Battery Voltage (Volts): 24-36V (wide working voltage)
- The buyer should confirm with the seller the battery system voltage, current rate and the throttle type (0-5kΩ, 5k-0Ω or 0 - 5V).
- Application vehicles:Heli Forklift, Hang Forklift,Lida Forklift
Features:
- Compact size.
- Environmental protection provided by a sealed package.
- Advanced high frequency power section utilizing custom power MOSFETs provides high efficiency, silent operation and reduced motor and battery losses.
- Power connections made by solid copper busses with polarized Molex connector for control signals.
- Thermal protection and compensation circuitry provide under temperature cutback, constant current limit over the operating range and linear rollback in over temperature. No sudden loss of power under any thermal conditions.
- Over voltage and under voltage protection.
- Fully compatible with 1313, 1314, and 1307 Programmers for full parametric adjustment, tuning, test and diagnostics.
- Complete diagnostics of the controller can also be accomplished with the built-in status LED.
- Meets or exceeds EEC fault detection requirements with circuitry and software to detect faults in the throttle circuit, MOSFET drive circuits, MOSFET transistors, contactor drivers and contactors.
- Input sequencing options include neutral start (HPD) and static return to off (SRO).
- True arcless contactor switching with microprocessor controlled contactor sequencing.
- Throttle position variable or fixed plugging current options.
- Neutral braking option provides for automatic plug braking in neutral.
- MultiMode™ option for programmable two mode (current limit, speed, acceleration) operation.
- Emergency reverse function (belly button) provides full function with a single input. Additional output provides for
an emergency reverse circuit continuity check.
- Anti-rollback (ramp start) function gives full power for starting on ramps.
- Simple contactor and switch wiring. Coil drivers are monitored for short and open circuit for fail-safe operation.
- Flexible throttle circuitry accepts a variety of throttle types including: 5k-0, 0-5k, 0-5v, 0-10v and three wire potentiometer.
- Dimensions (L×W×H): 309 × 180 × 82 mm
- PWM operating frequency: 15 kHz
- Electrical isolation to heatsink: 500 VAC (minimum)
- Contactor voltage = battery voltage
- Contactor current (maximum): 1 amp [current limit at 2 amps]
- Contactor coil spike protection: internal diode to brake; internal diode from brake to KSI
- KSI input voltage: 16-45 V
- KSI input current (typical): 80 mA without programmer; 130 mA with programmer
- Logic input current (typical): 10 mA at 24 V
- Logic input threshold: 8 V
- Ambient operating temperature range: -40°C to 50°C
- Heatsink overtemperature cutback: 85°C
- Heatsink undertemperature cutback: -25°C
Note:Voltage:24V/36V,optional.
Package List:
- 1 x CURTIS PMC 1253C-4402 DC Motor Controller
Q1.Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. Do you have any MOQ limit?
A: Small quantity is accepted , but we offer quantity discount.
){kind=link}