Product Description
P1207-5101 24V 300A Programmable DC Series Motor Controller Replacement of CURTIS 1207B-4102
| Product nume |
DC Motor Controller |
Car Fitment |
MIMA, HELI, HANGCHA, NOBLELIFT, EP, TCM, LIFTSTAR, XILIN, HYSTER, etc. |
| Voltage Options |
24V |
Current |
300A |
| Model |
P1207-5101 |
Storage temperature |
-40°C to +50°C |
| Color |
Original Color |
Type |
DC |
| Size |
L122xW165xH66 mm |
Single gross weight |
1.1kg |
| MOQ |
1 PCS |
Port |
Ningbo/Shanghai |
Overview:
CURTIS PMC 1207B programmable motor speed controllers are the latest upgraded version of popular 1207A controllers. The CURTIS 1207B programmable motor speed controller provides efficient, cost-effective, and simple-to-install control for a variety of small electric vehicles. Typical applications include walkie fork/pallet trucks, mini personnel carriers, and sweepers. The microprocessor-based logic section combined with a proven MOSFET power section gives the 1207B controller high power and advanced features in a simple, compact package.
The CURTIS programmers (Model 1313-4331 Handheld Programmer or 1314 PC Programming Station with 1309 USB Interface) enable the user to set parameters, conduct tests, and obtain diagnostic information quickly and easily.
Key Features:
- CURTIS Model: P1207-5101
- Norminal Battery Voltage (Volts): 24V
- Maximum operating voltage: 30 V
- Overvoltage point 33 V
- PWM operating frequency: 15 kHz
- Minimum operating voltage: 16 V (= undervoltage point)
- Contactor voltage: 24 V
- Contactor current (maximum): 1 amp (current limit at 2 amps)
- Electrical isolation to heatsink (min.): 500 VAC
- KSI input voltage: 16 - 30 V
- KSI input current (typical):
- 80 mA without programmer
- 130 mA with programmer
- Logic input current (typical): 10 mA at 24 V
- Logic input threshold: 8 V
- Contactor coil spike protection: internal diode to brake; internal diode from brake to KSI
- Shunt driver current (maximum): 2 amps
- Shunt driver spike protection: active clamp at 47 V
- 1 Minute Current Rating (amps): 300
- 2 Minute Current Rating (amps): 210
- 5 Minute Current Rating (amps): 160
- 1 Hour Current Rating (amps): 110
- Throttle Type:
- Type 1 = 5kΩ-0
- Type 2 = 0-5V, 3-wire pot, and electronic throttles
- Type 3 = 0-5kΩ throttles
- Ambient operating temperature range: -25°C to 50°C
- Heatsink overtemperature cutback: 85°C
- Heatsink undertemperature cutback: -25°C
- Package: splash resistant
- Dimensions: L122xW165xH66 mm
- Net Weight: 1.1 kg
Features Include:
- Power MOSFET design, providing
- infinitely variable drive and plug brake control
- silent high-frequency operation
- high efficiency (for reduced motor and battery losses)
- Compact size
- Overvoltage and undervoltage protection
- Thermal protection and compensation circuitry provides undertemperature cutback, constant current limit, and linear rollback in overtemperature - thus preventing sudden power loss regardless of thermal conditions
- CURTIS 1313-4331 Handheld Programmer (optional) provides a full set of parameter and function settings, as does the CURTIS 1314 PC Programming Station (optional)
- Diagnostic and test information for the controller - and other system components - readily available both on-board and through the programmer
- On-board potentiometers allow direct manual adjustment of acceleration rate, creep speed, maximum speed, plug current, and main current limit (1207 single-mode models only)
- Circuitry and software detects faults in the throttle circuit, MOSFET drive circuit, MOSFET transistors, contactor drivers, and contactors - ensuring that the controller meets EEC fault detect requirements
- Input sequencing options include neutral start and static return to off (SRO)
- Microprocessor-controlled contactor sequencing provides true arcless contactor switching
- Smooth, controlled plug braking - with either variable (throttle-dependent) or fixed plug current limit
- Neutral braking option provides automatic plug braking in neutral
- MultiMode™ input selects between two different operating modes, thus allowing optimization of vehicle characteristics for different driving conditions
- Emergency reverse (belly button switch) with a single input Ramp-start feature provides full power for starting on ramps
- Simple contactor and switch wiring, with coil drivers monitored for faults - thus ensuring fail-safe operation
- Flexible throttle circuitry accommodates a variety of throttle types
- Programmable "ramp shape" (static throttle map) provides flexibility in selecting throttle response feel
- Connections made by solid copper power busses with a polarized Molex connector for control signals
- Solid, well-protected construction - with an aluminum mounting plate and injection-molded cover.
Package List:
- 1 x CURTIS PMC P1207-5101 DC Motor Controller
Detailed Photos
Company Profile
Product Category
Application
Our Advantages
FAQ
Q1.Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. Do you have any MOQ limit?
A: Small quantity is accepted , but we offer quantity discount.
Q3. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q4. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q5. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production and Shipping.
Audited Supplier 
){kind=link}